Eigrp authentication and manual route summarization
Eigrp authentication using md5 and manual route summarization on participating eigrp interfaces allow network engineers/administrators to secure their routing table
Read moreCisco
Implementing full mesh DMVPN with Ipsec
Implementing full mesh dmvpn with Ipsec allows network engineers to securely connect remote sites to the HQ while at the
Read moreCisco certification update: write CCNP without having CCNA
Cisco certification plans have undergone major updates as detailed in the newly released certification guidelines aimed at addressing ‘the evolution
Read moreCisco layer2 MPLS with l2tpv3 implementation made easy
If you are reading this post and you desire to implement layer 2 mpls with l2tpv3 for transparent bridging between
Read moreWhy you should not use a free VPN on your router
To maintain your security online, it’s critical to ensure that your home connection is safe. The simplest way to achieve
Read moreUsing a /31 subnetmask for a point-to-point link. Wrong or smart move?
What would happen if a point-to-point link is addressed with a /31 subnetmask? In networking, when a point-to-point link is
Read moreHow to load-balance across multiple leased lines using PPP Multilink
With PPP multilink, users can bundle multiple leased lines into one with the combined capacity of all participating links, and
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt3
Previously on this topic, I configured physical and loopback interface IPs, ospf for reachability among mpls routers, and enabled mbgp
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt2
In this post, I will continue right from where I stopped in the part 1 of this topic, how to
Read moreHow to implement Cisco L3 MPLS to connect four customer branches
If you are reading this post, it means you want to know how to implement Cisco l3 mpls for connecting
Read moreUse Cisco router to redirect dns requests to a local dns server
If you are reading this post, it means you want to understand how to redirect dns requests to a local
Read moreConfigure Cisco dhcp relay agents using packet tracer in two minutes
In this lab, I will share with us on how to configure Cisco dhcp relay agents using Packet Tracer. Configuring
Read moreHow to create read-only user accounts on a Cisco router using Packet Tracer
In this post, I will share with us on how to create read-only user accounts on a Cisco router. If
Read more
How to configure redistribution between eigrp and RIP using Cisco Packet Tracer
In this LAB, I will be sharing with us on how to configure redistribution between eigrp and RIP using the
Read moreImplement RIP on Packet Tracer for a network topology with three Cisco routers
The routing information protocol is an industry-standard distance vector routing protocol available to all vendors. It is one of the
Read more