Creating a redundant layer two network using rapid spanning-tree protocol on Mikrotik
We can use the rapid spanning-tree protocol on Mikrotik to avoid layer two loops while creating redundancy on our networks.
Read moreHow to force upload traffics through a link using bgp default-originate command
When bgp is configured on a router with dual ISP connections, one of the requirements is to allow all upload
Read moreHow to redistribute static routes into eigrp using Cisco Packet Tracer
Route redistribution is a great way to share routes between routers running different routing protocols or routers running the same
Read moreHow to permit icmp request from the internet to the IP on the WAN interface of your security router
Security is paramount in networking, that is why Cisco puts extra layer of security on their gateway devices to make
Read moreHow to use the Mikrotik Nv2 wireless protocol to increase wireless link throughput.
The Nv2 wireless protocol was developed by Mikrotik for use with Atheros 802.11n chips and legacy 802.11a/b/g chips starting from
Read moreConfiguring a single-area OSPF for a network topology of three Cisco routers and five networks
The Open shortest Path First (Ospf) is one of the best internal routing protocols deployed by network engineers on enterprise
Read moreHow to configure a GRE tunnel between a Mikrotik router and a Cisco router
Generic Routing Encapsulation (GRE) is a tunneling protocol that was developed by Cisco to encapsulate a wide variety of protocols
Read moreHow to deny web access from a host to a server in an IPv6 network
The most popular and one of the most important simulation in the CCNA exam is the access-list question where candidates
Read moreHow to configure Site-to-site IPsec VPN using the Cisco Packet Tracer.
Cisco has made it possible to implement IPsec VPN on Packet Tracer by including security devices among the routers available
Read moreIPv6 routing: How to configure EIGRP on IPv6 networks using the Cisco Packet Tracer
Still on the IPv6 routing series, this demonstration will be on how to configure eigrp on IPv6 networks. Everyone talks
Read moreIPv6 routing: how to configure IPv6 static routes on a network topology with three routers
Yesterday, I made a post on how to configure static route on a network topology involving three routers. See here.
Read moreIPv4 routing: how to configure static route on a network topology with three routers
Static route is awesome if you know what you are doing. An excellent implementation of static route on your network
Read moreIPv6 routing: how to configure Routing information protocol next generation (RIPng) on Cisco routers.
It’s no longer news that the world is fast moving to an all-IPv6 network known as the internet 2. What
Read moreCisco ASA firewall initial configuration: IP address assignment, NAT and default routes.
The Cisco ASA firewall is a highly sophisticated piece of network gear that is required to provide a shield on
Read moreHow to block bit torrent/all P2P packets on Mikrotik routers for selected users during work hours
As a network administrator, being able to stamp your authority on your network by deciding what can and cannot be
Read more