Using a /31 subnetmask for a point-to-point link. Wrong or smart move?
What would happen if a point-to-point link is addressed with a /31 subnetmask? In networking, when a point-to-point link is
Read moreCisco
How to load-balance across multiple leased lines using PPP Multilink
With PPP multilink, users can bundle multiple leased lines into one with the combined capacity of all participating links, and
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt3
Previously on this topic, I configured physical and loopback interface IPs, ospf for reachability among mpls routers, and enabled mbgp
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt2
In this post, I will continue right from where I stopped in the part 1 of this topic, how to
Read moreHow to implement Cisco L3 MPLS to connect four customer branches
If you are reading this post, it means you want to know how to implement Cisco l3 mpls for connecting
Read moreHappy New Year to all Timigate blog visitors!!!
In the few years that Timigate has been in existence, this blog has been known as one of the very
Read moreUse Cisco router to redirect dns requests to a local dns server
If you are reading this post, it means you want to understand how to redirect dns requests to a local
Read moreConfigure Cisco dhcp relay agents using packet tracer in two minutes
In this lab, I will share with us on how to configure Cisco dhcp relay agents using Packet Tracer. Configuring
Read moreHow to configure a Cisco switch for remote management via ssh
In this lab, I will share with us on how to configure a Cisco switch for remote management via ssh.
Read moreHow to create read-only user accounts on a Cisco router using Packet Tracer
In this post, I will share with us on how to create read-only user accounts on a Cisco router. If
Read more
How to configure redistribution between eigrp and RIP using Cisco Packet Tracer
In this LAB, I will be sharing with us on how to configure redistribution between eigrp and RIP using the
Read moreImplement RIP on Packet Tracer for a network topology with three Cisco routers
The routing information protocol is an industry-standard distance vector routing protocol available to all vendors. It is one of the
Read moreHow to implement eigrp on a network topology with three Cisco routers
Enhanced Interior Gateway Routing Protocol, popularly known as EIGRP, is a Cisco proprietary advanced distance vector routing protocol. Eigrp uses
Read moreHow to queue customers to subscribed bandwidth on Cisco routers
Giving the ease and simplicity of implementing quality of service on Mikrotik and other GUI-enabled routers, many users have complained
Read moreCisco DMVPN setup for connecting branch offices, ATM and POS to HQ
The Cisco DMVPN, full name, dynamic mutipoint VPN has been around for years, allowing businesses to dynamically connect branch offices
Read more