Cisco layer2 MPLS with l2tpv3 implementation made easy
If you are reading this post and you desire to implement layer 2 mpls with l2tpv3 for transparent bridging between
Read moreWAN
Using Mikrotik MPLS with VPLS to connect two offices
In this demonstration, I will share with us on how to connect two offices together using Mikrotik MPLS with VPLS.
Read moreUsing a /31 subnetmask for a point-to-point link. Wrong or smart move?
What would happen if a point-to-point link is addressed with a /31 subnetmask? In networking, when a point-to-point link is
Read moreHow to load-balance across multiple leased lines using PPP Multilink
With PPP multilink, users can bundle multiple leased lines into one with the combined capacity of all participating links, and
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt3
Previously on this topic, I configured physical and loopback interface IPs, ospf for reachability among mpls routers, and enabled mbgp
Read moreHow to implement Cisco L3 MPLS to connect four customer branches pt2
In this post, I will continue right from where I stopped in the part 1 of this topic, how to
Read moreHow to implement Cisco L3 MPLS to connect four customer branches
If you are reading this post, it means you want to know how to implement Cisco l3 mpls for connecting
Read moreHow to configure Mikrotik sms notification for WAN link failure
The job of a network engineer becomes easier when he puts in so much efforts aimed at automating work processes.
Read moreCisco WAN: PPP implementation on packet Tracer
There are many methods of deploying wide area network (WAN) when using Cisco routers. Some of these methods are HDLC,
Read moreWAN: implementing frame-relay point to point on Cisco routers, from start to finish.
Most CCNA exam preps explain Frame-relay from a client’s angle and not from a service provider’s perspective. With such information,
Read more